Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Prevents need for summing and DSP devices. Provides factory sound system upgrade solution. Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier.
Enables the addition of a subwoofer system to the original sound system. Upgrade solution for factory, fixed level, data-bus controlled sound systems.Everything you need in one box to install your choice of aftermarket amplifier(s). Time-saving design, prevents need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings. Retains Bluetooth, navigation, safety system, and all warning chimes.
Front, rear, sub preamp outputs (5 volt RMS). Provides flat audio output for a solid audio foundation.Customized OE bass, mid, and treble center frequency selection. Plug-n-play installation with two 20-pin connectors (IE Bus). Remote sub level controller included.
Optional TOSLINK optical output APA-TOS1. Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual. We also sell complete install packages radios, speakers, etc. Please feel free to contact Customer Service with any install/package questions at 1-844-30AUDIO, Ext. NOTE: We advise that you retain all factory screws or other fasteners when removing the factory radio as these may be needed when installing your new aftermarket stereo system.Depending upon vehicle configuration other fasteners may be required. Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Volunteer Audio has been a family owned and operated, car-audio-installation and retail business since 2001.
We are Authorized On-Line Retailers for the brands we sell. You are protected from receiving grey-market, damaged, or altered products that may be available at other stores or websites. Thanks to our loyal customers, business has grown!
In addition to our experienced sales and customer service team, Volunteer Audio has MECP (Mobile Electronics Certified Professional) technicians and installers on staff to assist you with technical questions. Whether you are a first-time customer, or one of our many returning friends, we are committed to providing 100% satisfaction in products and service.
Thanks for shopping with us! There will be two tracking numbers provided. At Volunteer Audio we want to make sure that you are 100% satisfied. Contact Volunteer Tech Support for authorization before returning any defective items.
Items not in like-new condition, including but not limited to: items missing original product packaging, used items, installed items, abused or physically damaged items, items missing parts, damaged packaging and items damaged due to improper return packaging, and items with a different or defaced serial number. We will be happy to answer your questions or help you get the right part the first time. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Other Interior Parts & Accessories". The seller is "volaudio" and is located in this country: US. This item can be shipped worldwide.